The common packaging forms of adhesives are divided into hard tube packing (with paper, plastic and metal), and the common capacity and specification are hard.Canister gum has 310ML, 400mlIn the Americas, there are also American Quart capacity 946ml, but not common in China and Asia.Dachshund gum has 310ML, 400ml, 600mlThe sausage packaging is also called the soft bag package, which is packaged with plastic film to form the shape of the sausage.
The internal structure of the soft rubber gun:
Operation instructions of COXAirflowII pneumatic rubber gun
How can the air leak be solved in front of the pneumatic rubber gun cover?
When the hard cylinder is put into the cylinder of the pneumatic rubber gun, it is necessary to tighten the front cover. If there is air leakage in the front cover, please check the following aspects
- The front cover is tightened or not tightened.
- The front cover after tightening check the rubber barrel in the barrel should not rotate, otherwise it is hard rubber sleeve size is too short, do not meet the standards.
- Check whether the bottom of the cylinder is convex and concave, and the metal aluminum barrel is not careful during the packing and transportation process, which causes the bump of the bottom of the cylinder.
What is the difference between the pneumatic rubber gun AirflowI, the AirflowII and the Airflow3?
- AirflowI type pneumatic glue gun handle using COX heavy (metal), can be used for indoor and outdoor occasions poor, high noise, pressure regulating knob in the gun tail (careful use fall break this part), the pipe connection cannot rotate 360 degrees, I is the British COX company launched the first the product.
- AirflowII pneumatic glue gun tail with a silencer, noise is lower than 70dB, suitable for indoor applications where quiet, with plastic handle, the pressure regulating knob on the handle and the pipe joint can rotate 360 DEG and convenient operation, II is a British COX company launched the second generation of products.
- Airflow3 using the new design, in order to make the product easier to use, more efficient, the main features of the new design is a more ergonomic body is shorter, it is possible in a small space, glue gun lighter (for example: 310ML barrel type 0.66KG), I and II (0.73KG) to reduce more than 10% of the weight, the re design of the regulator provides higher performance, convenient maintenance and low failure rate, pressure regulator and silencer is integrated in the handle, more quiet, low noise, fully enclosed gas no exposed trachea, more reliable, this is the British company COX launched the third generation of products.